Cisco Catalyst 9120 Series Access point C9120AXI-S.
Cisco Part Number |
: C9120AXI-S
|
List Price |
: $Liên hệ ngay nhận giá tốt
|
Giá bán |
: Giá rẻ nhất thị trường
|
Bảo hành |
: 12 tháng
|
Made In |
: Liên hệ
|
Stock |
:Sẵn hàng
|
Mô tả tổng quan
Bộ phát wifi C9120AXI-S Catalyst 9120 Series là sản phẩm vượt xa hơn cả tiêu chuẩn Wi-Fi 6 (802.11ax) cung cấp bảo mật tích hợp, khả năng phục hồi và tính linh hoạt cũng như tính thông minh của mạng. Cisco C9120AXI-S dẫn đầu về hiệu suất, bảo mật và phân tích, được ghép nối với Cisco DNA, là sản phẩm cấp doanh nghiệp sẽ đáp ứng nhu cầu hiện tại và tương lai của bạn.
View Datasheet C9120AXI-S
C9120AXI-S access point hỗ trợ cả truy cập đa phân chia tần số trực giao (OFDMA) và MU-MIMO, với tốc độ lên tới 2,5 Gbps và khả năng tương thích Ethernet NBASE-T và IEEE 802.3bz giúp giảm tải lưu lượng mạng một cách liền mạch mà không gặp bất kỳ vấn đề nào.
Thông số kỹ thuật
Software |
– Cisco Unified Wireless Network Software Release 8.9.x or later
– Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later
|
Supported wireless LAN controllers |
– Cisco Catalyst 9800 Series Wireless Controllers
– Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
|
802.11n version 2.0 (and related) capabilities |
– 4×4 MIMO with four spatial streams
– Maximal Ratio Combining (MRC)
– 802.11n and 802.11a/g beamforming
– 20- and 40-MHz channels
– PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 Dynamic Frequency Selection (DFS)
– Cyclic Shift Diversity (CSD) support
|
802.11ac |
– 4×4 downlink MU-MIMO with four spatial streams
– MRC
– 802.11ac beamforming
– 20-, 40-, 80-, and 160-MHz channels
– PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 DFS
– CSD support
|
802.11ax |
– 4×4 downlink MU-MIMO with four spatial streams
– Uplink/downlink OFDMA
– TWT
– BSS coloring
– MRC
– 802.11ax beamforming
– 20-, 40-, 80-, and 160-MHz channels
– PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
– Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
– 802.11 DFS
– CSD support
|
Integrated antenna |
Flexible radio (either on 2.4GHz or on 5GHz) – 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
– 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Dedicated 5GHz radio – 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
|
External antenna (sold separately) |
– Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
– Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna
– Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
– Supports Self-Identifiable Antennas (SIA) on one RP-TNC port
|
Smart Antenna Connector |
– Available on the 9120E and on the 9120P only
– Compact multi RF connector with DART interface
– Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector
– Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio
|
Interfaces |
– 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
– Management console port (RJ-45)
– USB 2.0 @ 3.75W (enabled via future software)
|
Indicators |
– Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
|
Dimensions (W x L x H) |
8.5 x 8.5 x 1.7” (21.6 x 21.6 x 4.3 cm)
|
Weight |
2.87 lbs (1.3 kg)
|
PoE Power Consumption |
802.3at (PoE+)
|
2.4-GHz radio | 4×4 |
5-GHz radio | 4×4 |
Link speed | 2.5G |
USB | Yes |
LLDP | 25.5W |
Reviews
There are no reviews yet.